Forum



FAN CONTROLLER SENSOR WIRING

05-Mar-2013 09:59 AM

Web Master

Posts: 12

Miratron FC100 and FRC100 fan controllers use an automotive style temperature sender to measure temperature. Correct installation of the sensor is required for accurate readings and proper fan control.

Most automotive temperature senders, including the TS10 model used by Miratron FC100 and FRC100 are single terminal types, which connect with only a single wire. Proper operation requires that the sender be threaded into a chassis-grounded metal fitting.

If the sender is to be installed in fiberglass, plastic, or other non-metal or un-grounded fitting, a ring terminal and ground wire must be used.

 
No one logged in.