Forum



HOW TO SET UP PC20

05-Mar-2013 10:01 AM

Web Master

Posts: 12

1. Connect coil, lamp, or other load device(s) to PC20. A load is required for proper operation.Voltmeter may be used with load to measure output.

2. Connect power. 12 or 24 VDC only. Fuse is recommended in case of load or wiring fault.

3. Select SINGLE or DUAL coil setup mode and proceed as shown:





Reference PC20 Cut-Sheet for Wiring
SINGLE COIL SETUP
DUAL COIL SETUP

Download written instructions: PC20 MANUAL PC20 Cut-Sheet


 
No one logged in.